Modified Oil and Tungseal Catalyst by Urethane Coatings - Polyurethane Specialists Since 1979

Modified Oil and Tungseal Catalyst

MSDS

Urethane Coatings TungsealDesigned for addition to MODIFIED OIL GLOSS & SATIN, TUNGSEAL and suitable for addition to NATURAL DECKING OIL.  Recommended for use in conditions of low temperature and/or with timber containing high levels or oil and/or wax.

DIRECTIONS:

  1. Recommended for use in conditions of low temperature or with timber containing high levels of oil or waxes.
  2. Add at the rate of to 50mls per litre of MODIFIED OIL GLOSS, TUNGSEAL and MODIFIED OIL SATIN.
  3. Suitable for addition to Urethane Coatings NATURAL DECKING OIL, in conditions of low temperature and/or with decking timber containing high levels or oil and/or wax.

Contains 90gms per litre of Aromatic Hydrocarbons.

SHELF LIFE:

This product is best if used within 24 months from manufacture (refer to batch number), when stored in unopened containers under normal conditions of temperature and humidity.

FIRST AID:

If affected by inhalation of vapour, remove to fresh air. If breathing difficulty persists or occurs later, consult a doctor and have label ready. If swallowed, do NOT induce vomiting. Give water or milk. CONTACT DOCTOR OR POSIONS INFORMATION CENTRE Australia 131126. In case of eye contact, flush immediately with water for fifteen minutes and call a doctor. In case of skin contact, remove contaminated clothing and wash skin first with Methylated spirits then with soap and water.