Industrial Methylated Spirit by Urethane Coatings - Polyurethane Specialists Since 1979

Industrial Methylated Spirit 100%

MSDS

Without the water of 95% metho, provides a quality cleaner for removal of surface contaminants prior to coating.  DEFINITELY NOT to be used as a Thinner.

USES:

  1. Urethane Coatings INDUSTRIAL METHYLATED SPIRIT 100% (contains zero water as with alternative 95% metho) provides a quality cleaner for removal of surface contaminants prior to coating.
  2. DEFINITELY NOT to be used as a Thinner
  3. To clean your floor, mix up to one cup of Methylated Spirits into a bucket of hot water, and mop the floor, regularly rinsing the mop.  .  If the floor is particularly dirty, wash first with a non abrasive detergent then clean with the Methylated spirits and water solution – this will prevent streaking and smear marks that sometimes remain after use of detergents and/or household cleaners.

SHELF LIFE:

This product is best if used within 24 months from manufacture (refer to batch number), when stored in unopened containers under normal conditions of temperature and humidity.

SAFETY DIRECTIONS:

Usage of this material must be under well ventilated conditions to minimise inhalation of vapours. Wear respirator with filters that conform with AS1716.

WARNING FLAMMABLE:

This drum contains volatile and flammable solvents and when using contents adequate ventilation to the outside must be provided. All potential sources of ignition (open flames, pilot lights, furnaces, spark producing electrical switches, etc.) must be eliminated in or near the working area. DO NOT SMOKE. Keep drum closed when not in use.

FIRST AID:

If affected by inhalation of vapour, remove to fresh air. If breathing difficulty persists or occurs later, consult a doctor and have label ready. If swallowed, do NOT induce vomiting. Give water or milk. CONTACT DOCTOR OR POISONS INFORMATION CENTRE Australia 131126. In case of eye contact, flush immediately with water for fifteen minutes and call a doctor. In case of skin contact, remove contaminated clothing and wash skin and clothing with soap and water.

FIRST AID:

If poisoning occurs contact a DOCTOR or POISONS INFORMATION CENTRE Australia 131126. If swallowed, do NOT induce vomiting. Give water of milk. If skin contact occurs, remove contaminated clothing and wash skin with soap and water. In case of eye contact, flush immediately with water for fifteen minutes.