Cleaning Solvent by Urethane Coatings - Polyurethane Specialists Since 1979

Cleaning Solvent


Urethane Coatings Cleaning SolventBlended for washing and cleaning all rollers, applicators, brushes and equipment.  NOT designed as a Thinner.


Urethane Coatings BLENDED CLEANING SOLVENT is for washing and cleaning brushes, rollers and lambs wool applicators and associated equipment.  This solvent is NOT designed to be used as a thinner for Urethane Coatings products.


This product is best if used within 24 months from manufacture (refer to batch number), when stored in unopened containers under normal conditions of temperature and humidity.


Usage of this material must be under well ventilated conditions to minimise inhalation of vapours. Wear respirator with filters that conform with AS1716.


Contains 525gms per litre of Aromatic Hydrocarbons. This drum contains volatile and flammable solvents and when using contents adequate ventilation to the outside must be provided. All potential sources of ignition (open flames, pilot lights, furnaces, spark producing electrical switches, etc.) must be eliminated in or near the working area. DO NOT SMOKE. Keep drum closed when not in use.


If affected by inhalation of vapour, remove to fresh air. If breathing difficulty persists or occurs later, consult a doctor and have label ready. If swallowed, do NOT induce vomiting. Give water or milk. CONTACT DOCTOR OR POISONS INFORMATION CENTRE Australia 131126. In case of eye contact, flush immediately with water for fifteen minutes and call a doctor. In case of skin contact, remove contaminated clothing and wash skin and clothing with soap and water.