Mineral Turpentine & White Spirit by Urethane Coatings - Polyurethane Specialists Since 1979

Mineral Turpentine & White Spirit

MSDS | MSDS

Available to reduce TUNGSEAL, MODIFIED OIL GLOSS, & MODIFIED OIL SATIN.

USES:

  1. Urethane Coatings MINERAL TURPENTINE & / or WHITE SPIRIT provide a quality cleaner for removal of surface contaminants prior to applying MODIFIED OIL GLOSS, TUNGSEAL and MODIFIED OIL SATIN or as a cleaner between coats when treating oily timbers.
  2. May be used as a Thinner or reducer for MODIFIED OIL GLOSS, TUNGSEAL and MODIFIED OIL SATIN.
  3. Thoroughly clean the mohair roller, lamb’s wool applicator or brush in Urethane Coatings MINERAL TURPENTINE after applying MODIFIED OIL GLOSS, TUNGSEAL, & MODIFIED OIL SATIN.  Dry all equipment before reusing.

SHELF LIFE:

This product is best if used within 24 months from manufacture (refer to batch number), when stored in unopened containers under normal conditions of temperature and humidity.

SAFETY DIRECTIONS:

Usage of this material must be under well ventilated conditions to minimise inhalation of vapours. Wear respirator with filters that conform with AS1716.

WARNING FLAMMABLE:

This drum contains volatile and flammable solvents and when using contents adequate ventilation to the outside must be provided. All potential sources of ignition (open flames, pilot lights, furnaces, spark producing electrical switches, etc.) must be eliminated in or near the working area. DO NOT SMOKE. Keep drum closed when not in use.

FIRST AID:

If affected by inhalation of vapour, remove to fresh air. If breathing difficulty persists or occurs later, consult a doctor and have label ready. If swallowed, do NOT induce vomiting. Give water or milk.

CONTACT DOCTOR OR POISONS INFORMATION CENTRE Australia 131126.

In case of eye contact, flush immediately with water for fifteen minutes and call a doctor. In case of skin contact, remove contaminated clothing and wash skin and clothing with soap and water.